08_Workshop5_Coaxial Tee의 S-Parameters와 필드 플롯 Flipbook PDF

08_Workshop5_Coaxial Tee의 S-Parameters와 필드 플롯
Author:  T

78 downloads 149 Views 2MB Size

Story Transcript

Workshop 5 : Coaxial Tee의 S-Parameters와 필드 플롯

1

Coaxial Tee의 S-Parameter와 필드 플롯 HFSS post-processing 관한 이 워크숍은 S-Parameter의 Rectangular 플롯과 필드 플롯을 중점으로 둡니다. HFSS FEM 프로젝트 CoaxTee0.aedt로 시작합니다. Part 1: S-Parameter 플롯하기 • CoaxTee1.aedt의 S-Parameter rectangular 레포트 생성하기 • Profile을 참조하여 시뮬레이션의 Sweep과 Mesh 사이즈 확인하기 • Resonance 확인을 위해 S11 보기 Part 2: Field 플롯하기 • Patch_AntennaPad에서 더 작은 Region 만들기 • Assign a radiation boundary with padding in individual directions. • Patch_AntennaPad 시뮬레이션 이 워크숍에서는 다음 파일을 사용합니다. : CoaxTee0.aedt. 최종 HFSS 프로젝트 파일 이름은 다음과 같습니다.: CoaxTee2.aedt. 2

ANSYS Electronics Desktop 실행 HFSS 프로젝트를 열고 Options 설정하기  HFSS 실행을 위해 시작 버튼 클릭 :  Programs > ANSYS Electromagnetic Suite >

ANSYS Electronics Desktop

 Project Manager 아래에 Project1이 나타납니다.

Tool Options 설정  Menu Item 선택 Tools > Options >

General Options

여기에 제안 된 옵션 설정은 사용자가 워크샵의 단계를 지속적으로 따를 수 있도록 합니다.

3

Tool > Options 설정 – Boundary와 Drawing Selected: Tools > Options > General Options HFSS 확장 (+ 모양 클릭) 후 Boundary Assignment 선택  모든 항목 체크

3D Modeler 확장 후 Drawing  Automatically cover closed polylines:  체크  Edit properties of new primitives:  체크

4

Tool > Options 설정 - Display History와 Transparency  Display 확장  Rendering 선택 후 Default Transparency를 0.7로 설정  History Tree 클릭 후 모든 항목 체크 (이미지 없음)

옵션 대화상자를 닫기 위해 OK 버튼 클릭

5

Coaxial Tee의 S-Parameter 이 모델은 분배기 입니다. 모든 포트의 전원이 다른 두 포트로 나뉩니다.

6

HFSS Project File열기: CoaxTee0.aedt File > Open, 제공된 HFSS Project 파일 열기 : CoaxTee0.aedt File > Save As 클릭 > 다음과 같이 이름을 변경하여 작업 폴더에 저장 : CoaxTee1.aedt  모든 HFSS 워크숍 파일을 저장합니다. 향후 워크숍에서 파일을 계속 사용합니다.

Project Manager에서 설정된 결과가 없는 것을 확인 합니다.

확장하기 위해 + 기호 클릭.

Click on + symbols to expand.

결과 없음

7

Save, Validate, Analyze HFSS Project CoaxTee1.aedt 프로젝트 검사를 위해 리본 탭에 있는 녹색 체크 마크 ‘Validate’ 클릭 (선택 된 시뮬레이션에서) File > Save클릭 > project 저장  모든 HFSS 워크숍 파일을 저장합니다. 향후 워크숍에서 파일을 계속 사용합니다.

HFSS 시뮬레이션 시작을 위해 리본 탭에 있는 Analyze All 클릭  Validation 검사와 Analyze All 실행은 HFSS GUI 상단 풀다운 탭 에서도 가능합니다.

시뮬레이션이 끝나면 CoaxTee1.aedt로 저장

Click on Show Messages and Show Progress in the bottom right of the GUI in order to see the simulation progress. 8

Access S-Parameter Graph Reports from Project Manager Results Project Manager에서 Results 위에 마우스 우 클릭 > Create Modal Solution Data Report > New Report 대화상자를 띄우기 위해 Rectangular Plot 클릭.

S-parameters Rectangular Plot은 상단 풀다운 메뉴에서도 가능합니다.: HFSS > Results > Create Modal Solution Data Report > Rectangular Plot.

9

Access S-Parameter 2D Graph Reports from Results Ribbon

S-parameters Rectangular Plot 은 상단 리본 탭 Results에서도 가능합니다.: HFSS > Results > Create Modal Solution Data Report > Rectangular Plot.

10

Specify S-Parameters in New Report Dialog Box Category에서 S Parameter 선택 Shift 키 또는 (필요한 경우) Ctrl+A를 이용하여 S(p1,p1), S(p1,p2), S(p1,p3) 선택 Function에서 dB선택 (기본으로 자동 선택)

Primary Sweep을 Freq로 설정 X:  체크 표시 (기본값) 좌측 Context 영역에서:  Solution: 기본값 Setup1: Sweep  Domain: 기본값 Sweep  Real time이  체크 표시 되어 있는지 확인

New Report > Close 11

View Coaxial Tee S-Parameter Simulation Results 만약 결과 창이 나타나지 않는 경우 Project Manager에서 첫번째 플롯 S Parameter Plot 1을 더블 클릭

신호 dB(S(p1, p2)) 과 dB(S(p1, p3))는 전달 S-Parameters이며 파워 분할을 나 타냅니다..

신호 dB(S(p1, p1)) 은 반사 S-Parameter 입니다.

12

Delete Reflection S-Parameter Project Manager, 첫번째 신호 dB(S(p1,p1) 우 클릭 > Delete 선택 The signal dB(S(ms,ms)) is the reflection S-Parameter (like an S11 or S22) on the b ack wave port.

결과 레포트에 이제 두 개의 신호만 있으며 플롯은 고주파 발산을 나타냅 니다.

13

Optional: Port 2 S-Parameters on CoaxTee1.aedt Port2를 바라보는 신호의 두번째 S-parameter 레포트 플롯 생성

14

Part 2: Plot E-Fields on CoaxTee2.aedt 모델 트리에서, Model 우클릭 후 Select All 선택

형상에 켭쳐진 필드를 플롯 하기 위해 객체 또는 면이 선택 되어야 합니다.

Objects show pink/magenta color when selected.

Project Manager에서 프로젝트 CoaxTee1.aedt 이름 우클릭 후 File > Save As CoaxTee2.aedt 선택 15

Part 2: Plot E-Fields on CoaxTee2.aedt Project Manager에서, Field Overlays 마우스 우클릭 > Plot Fields > E > Mag_E > Field Plot 대화 상자 생성

Field Overlays

Create Open Region… puts Open1 in the Proj ect Manager under Boundaries and Radiatin g Surface in the Model. Below RadiatingSur face, CreateRegion is the command. 16

The Create Field Plot Dialog Box at 10 GHz Create Field Plot 윈도우에 나타나는 설정 을 사용 할 수 있어야 합니다. Quantity에 Mag_E 가 선택되었는지 확인 합니다. Volume 내에서 선택한 모든 객체가 표시 되지 않을 수 있습니다. Field 플롯을 완료하기 위해 Done을 클릭 합니다. 새 이름으로 저장을 하지 않았다면 Project Manager에서 프로젝트 이름 (CoaxTee1.aedt)를 마우스 우클릭 하여 File > Save As > CoaxTee2.aedt로 저장 합니다.

17

CoaxTee2 E-Field Magnitude on All Objects Linear Scale

이 대화상자는 Project Manager > Field Overlays > E Field에서 제공됩니다. 마우스 우클릭 후 Modify Attributes을 선택합니다. 다음 슬라이드에서 자세히 살펴 보겠습니다.

E-field Magnitude 플롯은 우측 설정에 해당합니다. 다음 슬라이드에서는 이 설정들을 변경합니다. 지금 스케일은 Linear Scale입니다. 18

CoaxTee2 E-Field Magnitude on All Objects Log Scale

Field Plot을 조정하기 위해 Project Manager에서 E-Field를 마우스 우클릭 합니다. 탭 대화상자를 띄우기 위해 Modify attributes...를 선택합니다. Scale 탭에서 Log를 클릭 합니다.

Optional: for further adjustments to field plot setup, see the Help/GSG installation directory and the document "HFSS Coax Tee.pdf"

19

Turn Off Field Plot Visibility - All Objects Field Plot Visibility를 끄려면 Project Manager에서 Mag_E1 Field 우클릭 후 Plot Visibility 토글(체크 해제)합니다. 이 작업은 Field Overlay를 삭제하는 작업이 아닙니다.

(Field Plot Visibility를 끈 상태에서 Project Manager에서 Field Overlay Mag_E1을 선택하면 Field Overlay가 나타납니다. 20

Optional: Animate CoaxTee2 E-Field Magnitude

이 Field Plot은 Phase 함수로 에니메이션될 수 있습니다.

21

Optional: Show Current on Pins (Coaxial Conductors) - Coax_Pin Model tree에서 Coax_Pin 클릭하여 선택

Project Manager에서 Field Overlays를 우클릭하고 Plot Fields > J > Mag_Jsurf를 선택하여 Create Field Plot 대화상자를 띄웁니다. 기본설정이 정상 동작 해야합니다.(10GHz)

Solution: Setup1 : LastAdaptive. Done 클릭 22

Optional: Set Up Animation of Surface Current on Pins Coax_Pin Project Manager의 Field Overlays > Jsurf> Mag_Jsurf 우클릭 후 Animate 선택

에니메이션 대화상자가 나타나면 OK버튼 클릭 도출되는 애니메이션은 위상에 대한 애니메이션 입니다. 23

Optional: Animation of Surface Current on Pins Coax_Pin 애니메이션 대화상자가 나타나면, 버튼을 이용해 앞으로 재생, 뒤로 재생, 정지 제어를 할 수 있습니다. Stop

Play

24

Get in touch

Social

© Copyright 2013 - 2024 MYDOKUMENT.COM - All rights reserved.