Marine UNIVERSAL METAL PRIMER - Barn Painting & Advertising Flipbook PDF

KEM BOND® HS UNIVERSAL METAL PRIMER B50NZ3 RED OXIDE B50WZ4 OFF WHITE B50AZ8 GRAY Revised 6/06 Industrial & Marine C

---

424 Views
179 Downloads
FLIP PDF 37.56KB

DOWNLOAD FLIP

REPORT DMCA

2.12

Industrial & Marine Coatings

KEM BOND® HS UNIVERSAL METAL PRIMER B50NZ3 B50WZ4 B50AZ8

RED OXIDE OFF WHITE GRAY

PRODUCT INFORMATION PRODUCT DESCRIPTION

Revised 6/06

RECOMMENDED USES

KEM BOND HS is a fast drying, high solids, low VOC, heavy metal free, rust inhibitive, universal, alkyd metal primer. Kem Bond HS can be topcoated with alkyd, acrylic, and high performance coatings. Also suitable as a "barrier" coat over conventional coatings which would normally be attacked by strong solvents in high performance coatings. • High build to protect sandblasted steel • Good corrosion and rust protection • Can be used as a "universal" primer under high performance topcoats • Fast drying

PRODUCT CHARACTERISTICS

For industrial application on steel to protect against atmospheric corrosion. Interior/exterior use. A premium shopcoat primer. For use under a variety of coatings, including high performance topcoats. • Rail cars • Tanks • Structural steel • Bridges • Machinery and equipment • Vessels • Piping and pipe racks • Bulkheads • Marine applications • Conforms to AWWA D102-03, OCS #1 • Suitable for use in USDA inspected facilities Acceptable for use in high performance architectual applications.

PERFORMANCE CHARACTERISTICS System Tested: (unless otherwise indicated) Substrate: Steel Surface Preparation: SSPC-SP2 1 ct. Kem Bond HS @ 3.0 mils dft 1 ct. Industrial Enamel HS @ 3.0 mils dft

Finish:

Flat

Color:

Red Oxide, Off White, Gray

Volume Solids:

61% ± 2%, may vary by color

Weight Solids:

79% ± 2%, may vary by color

Abrasion Resistance: Method: ASTM D4060, 500 cyles, 500 gm Load Result: 46 mg loss

VOC (EPA Method 24):

Unreduced: