Protective DTM Wash PriMer Marine Coatings Flipbook PDF

www.sherwin-williams.com/protective Revised: January 9, 2015 DTM Wash PriMer B71Y1 Protective & Marine Coatings 1.20

---

111 Views
31 Downloads
FLIP PDF 540.31KB

DOWNLOAD FLIP

REPORT DMCA

DTM Wash Primer

Protective & Marine Coatings

B71Y1

Revised: January 9, 2015

1.20

Product Description

Recommended Uses

DTM Wash Primer is a low VOC, water based wash primer free of heavy metals and mineral acids. Designed to be applied over aluminum and galvanizing, or used as a tie-coat over zinc rich primers. Accepts high performance "hot" solvent topcoats directly, such as epoxies and urethanes. • Fast dry • Low odor • Flash rust/early rust resistant • Extended recoat time • No "critical" film thickness

Product Characteristics Finish:

For use over prepared: • • • • • • •

Aluminum Galvanizing Stainless steel Zinc rich primers Must be topcoated Suitable for use in USDA inspected facilities Acceptable for use in Canadian Food Processing facilities categories: D1, D3 (Confirm acceptance of specific part numbers/rexes with your SW Sales Representative)

Flat

Performance Characteristics

Color: Yellow-Green Volume Solids:

21% ± 2%

Weight Solids: VOC (EPA Method 24):

29% ± 2%

Substrate*: Aluminum Surface Preparation*: SSPC-SP1 System Tested*: 1 ct. DTM Wash Primer @ 1.0 mils (25 microns) dft *unless otherwise noted below