Data Loading...

R & D Marine Bobbins - Marine Parts Supply Flipbook PDF

Steel Clamp Half Couplings Adaptors & Bobbins • Clamps to give a better fit than a solid coupling • Machined from so

106 Views
81 Downloads
FLIP PDF 449.3KB

MARINE PARTS SUPPLY (800) 661-5353

Steel Clamp Half Couplings MARINE PARTS SUPPLY (800) 661-5353 Adaptors & Bobbins • Clamps to give a better fit than a solid coupling

MARINE PARTS SUPPLY (800) 661-5353 • Machined from solid steel • Able to accommodate normal shaft tolerances

• Available in standard sizes

MARINE PARTS SUPPLY (800) 661-5353 (Both Metric and Imperial) • Easy to install and position

• Wide range of stock R & D Marine has developed a comprehensive range of competitively priced Steel Clamp Half Couplings with flange sizes from 4 to 7 1/4 inch diameter.

MARINE PARTS SUPPLY (800) 661-5353

• Competitively priced

Steel Clamp Half Couplings can accommodate the variations that occur with normal shaft tolerances, are easy to install and can be adjusted to the required position on the shaft.

R & D Marine have the capacity to machine Split Half Couplings to special sizes not in the literature.

• In - House customization

• Special Half Couplings can be supplied in small batches

MARINE PARTS SUPPLY (800) 661-5353

R & D Marine can also offer pilot drilled Solid Half Couplings suitable for parallel and taper boring. Adaptors to fit larger couplings to gearbox flanges and Bobbins to extend the shaft.

Products are available ex-stock and worldwide through our distribution network.

• Worldwide availability

MARINE PARTS SUPPLY (800) 661-5353

R & D Marine Steel Split Half Couplings MARINE PARTS SUPPLY (800) 661-5353 a Supplied with Shaft Clamp Bolts and Nuts Imperial Sizes Keyways to BS46: Part 1 Square

g c& d

e

Metric Sizes Keyways to BS4235: Part 1 Rectangular

b

f

Units(800) of measurement: Black Millimetres Red Inches MARINE PARTS SUPPLY 661-5353

Shaded area designates range of bores covered.

Imperial Bore Diameters (Inch) -

B

D

F

H

J

K

L

Coupling Dimensions M

a

b

c

d

e

f

g

Hole Size

Register Diameter M = Male F = Female

Length

Boss Diameter

63.5 2.50 50.0 1.97 60.0 2.36 47.0 1.85 63.5 2.50 65.0 2.56 76.2 3.00 76.2 3.00 63.5 2.50 95.25 3.75 95.25 3.75 95.25 3.75 95.25 3.75

81.0 3.19 81.0 3.19 85.8 3.28 85.8 3.28 95.3 3.75 95.3 3.75 139.7 5.50 139.7 5.50 143.0 5.63 190.5 7.50 190.5 7.50 190.5 7.50 190.5 7.50

85.9 3.38 85.9 3.38 85.9 3.38 85.9 3.38 103.2 4.06 103.2 4.06 136.7 5.38 136.7 5.38 103.2 4.06 168.4 6.63 168.4 6.63 168.4 6.63 168.4 6.63

B

B

B

2.750

B

2.50

B

2.250

B

2.00

1.50

B

1.750

1.250

202-153 4" BW, PRM, Hurth Max Bore 1.500 202-254 4" Yanmar Max Bore 1.500 202-255 4" Volvo Max Bore 1.500 202-489 4" Bukh Max Bore 1.500 202-168 5" BW, PRM, Hurth, Volvo. Max Bore 2.000 202-316 5" Yanmar Max Bore 2.000 202-176 6" PRM Max Bore 2.500 202-188 6" Twin Disc Max Bore 2.500 202-313 5" IRM 220, MG 502 Max Bore 2.000 202-381 7 1⁄4" PRM 601, 1000 4:1 Max Bore 2.750 202-468 7 1⁄4" PRM 1500 Max Bore 2.750 202-469 7 1⁄4" Twin Disc Max Bore 2.750 202-470 7 1⁄4" ZF 311A Max Bore 2.750

.875

1.00

Type of Gearbox .750

Part No

-

Flange Diameter

Hole Pitch Circle

102.0 4.00 102.0 4.00 102.0 4.00 90.0 3.54 127.0 5.00 119.9 4.72 146.0 5.75 146 5.75 127.0 5.00 189.2 7.45 189.2 7.45 189.2 7.45 189.2 7.45

82.55 3.25 78.00 3.07 80.00 3.15 74.5 2.93 109.95 4.25 100.00 3.94 120.6 4.75 120.6 4.75 98.6 3.88 152.4 6.00 152.4 6.00 152.4 6.00 152.4 6.00

No of Holes

4 4

10.0 0.394 10.0 0.394 10.0 0.394 8.1 0.32 11.2 0.44 10.0 0.394 12.7 0.50 16.0 0.63 12.0 0.47 16.0 0.63 16.0 0.63 19.0 0.75 16.0 0.63

B 4 MARINE PARTS SUPPLY (800) 661-5353 B

P

B BK BK BK BK

P

BK

P

BK BK BK BK BK BK

P

BK BK

P

4 4

4 6 6 6

MARINE PARTS SUPPLY (800) 661-5353 P 6 P P P Metric Bore Diameters (mm) B

C

D

F

H

J

K

L

6 8

M N

a

b

c

d

B

B

BK BK BK BK BK

70

B

60

B

55

B

50

35

B

45

30

B

40

25

Flange Hole Pitch No of Hole Size MARINE PARTS SUPPLY (800) 661-5353 Diameter Circle Holes

202-165 4" BW, PRM, Hurth B Max Bore 40mm 202-257 4" Yanmar B Max Bore 40mm 202-258 4" Volvo B Max Bore 40mm 202-490 4" Bukh Max Bore 40mm 202-171 5" BW, PRM, Hurth Volvo. Max Bore 50mm 202-300 5" Yanmar Max Bore 50mm 202-178 6" PRM Max Bore 60mm 202-314 6" Twin Disc Max Bore 60mm 202-315 5" IRM 220, MG 502 Max Bore 50mm 202-466 7 1⁄4" PRM 601, 1000 4:1 Max Bore 70mm 202-471 7 1⁄4" PRM 1500 Max Bore 70mm 202-472 7 1⁄4" Twin Disc Max Bore 70mm 202-473 7 1⁄4" ZF 311A Max Bore 70mm

102.0 4.00 102.0 4.00 102.0 4.00 90.0 3.54 127.0 5.00 119.9 4.72 146.0 5.75 146 5.75 127.0 5.00 189.2 7.45 189.2 7.45 189.2 7.45 189.2 7.45

82.55 3.25 78.00 3.07 80.00 3.15 74.5 2.93 109.95 4.25 100.00 3.94 120.6 4.75 120.6 4.75 98.6 3.88 152.4 6.00 152.4 6.00 152.4 6.00 152.4 6.00

4 4 4 4 4

10.0 0.394 10.0 0.394 10.0 0.394 8.1 0.32 11.2 0.44 10.0 0.394 12.7 0.50 16.0 0.63 12.0 0.47 16.0 0.63 16.0 0.63 19.0 0.75 16.0 0.63

BK BK BK BK BK BK

6 6

6 6 6

MARINE PARTS SUPPLY (800) 661-5353 6

P - Pilot Drilled

Recommended tightening torque:

M10 - 61 Nm 45 lbsft

F F M M M F F M F F F

e

f

g

Register Diameter M = Male F = Female

Length

Boss Diameter

63.5 2.50 50.0 1.97 60.0 2.36 47.0 1.85 63.5 2.50 65.0 2.56 76.2 3.00 76.2 3.00 63.5 2.50 95.25 3.75 95.25 3.75 95.25 3.75 95.25 3.75

81.0 3.19 81.0 3.19 85.8 3.28 85.8 3.28 95.3 3.75 95.3 3.75 139.7 5.50 139.7 5.50 143.0 5.63 190.5 7.50 190.5 7.50 190.5 7.50 190. 7.50

85.9 3.38 85.9 3.38 85.9 3.38 85.9 3.38 103.2 4.06 103.2 4.06 136.7 5.38 136.7 5.38 103.2 4.06 168.4 6.63 168.4 6.63 168.4 6.63 168.4 6.63

BK BK 4 MARINE PARTS SUPPLY (800) 661-5353 BK

M

Coupling Dimensions

Type of Gearbox

22

Part No

6

M

B - Bored Only

7/16 UNF - 81 Nm 60 lbsft

8

BK - Bored & Keyed

1/2 UNF - 100 Nm 75 lbsft

M M F F M M M F F M F F F

5/8 UNF - 210 Nm 155 lbsft

R & D Marine Gearbox Output MARINE PARTS SUPPLY (800)Flange 661-5353 Adaptors R & D Marine can provide an adaptor for most gearboxes to allow the fitting of a flexible coupling from their extensive range. If the gearbox fitting you require is not listed please contact R & D Marine.

Flange machined to fit the selected R & D Flexible Coupling. The register could be male or female.

Flange machined to suit the gearbox output flange. The register could be male or female See listing below.

MARINE PARTS SUPPLY (800) 661-5353 Length to clear oil pump etc

Gearbox

Gearbox Register

Coupling

B/W, PRM, ZF-Hurth, Twin Disc, Volvo 4" to 5" Female 910-029 5" to 6" Female 910-032 Twin Disc MG 502 Male 910-032 MG 5075A Male 910-039 MG 5090A Male 910-024 MG 5111 SC Male 910-022 MG 5111 Male 910-022 MG 5114 Male 910-025 MG 5114A Male 910-024 MG 5114A Male 910-030 MG 5135A Male 910.024 MGX 5145 SC Male 910-025 MGX 5145 SC Male 910-030 MGX 5145 SC Male 910-030 MG 6449 Male 910-030 ZF-Hurth BW 61 Male 910-018 BW 120 Male 910-025 BW 195VP, 1950A Male 910-035 2000, 2050, 2050A BW 250A Male 910-030 255A, 255AP BW 255 VP Male 910-045 HSW 630 A1 Female 910-025 ZF 2000 Male 910-030 ZF 2500A Male 910-030 ZF 2500A Male 910-035 ZF 550A Male 910-030 IRM 220A Male 910-032 IRM 280A Male 910-039 IRM 280A Male 910-039 IRM 280A Male 910-039 IRM 305A Male 910-033 IRM 311A Male 910-039 IRM 311A Male 910-024 IRM 311A Male 910-040 IRM 311A Male 910-040 IRM 311-PL Male 910-024 IRM 320A Male 910-018 IRM 320AL Male 910-022 IRM 320A-1 Male 910-024 IRM 325A Male 910-024 IRM 325 IV Male 910-039 IRM 325 IV Male 910-040 IRM 325A Male 910-024 IRM 350A Male 910-024 IRM 350A Male 910-018 W350A Male 910-024

Maximum HP of Coupling kW HP

Effective length of Coupling Mm Inch

R & D Marine Reference

14.92 20 52.4 2.06 202-351 MARINE PARTS 27.6 SUPPLY 37 55.4(800) 2.18 661-5353 202-411

Effective length of Adaptor Mm Inch 22.3 74.7

0.88 2.94

27.6 41 63.1 44 44 20.9 63.1 89.52 67.5 20.9 89.4 89.4 89.4

37 55 85 65 65 28 85 120 85 28 120 120 120

55.4 63.3 56.7 44.5 44.5 49.8 56.7 58.4 56.7 49.8 58.5 58.5 58.5

2.18 2.49 2.23 1.75 1.75 1.96 2.23 2.30 2.23 1.96 2.30 2.30 2.30

202-148 EXP 249 EXP 244 EXP 147 EXP 193 EXP 184-2 EXP 205 EXP 238 202-477 EXP 251 EXP 253 EXP 260 EXP 208

54 69.9 193.7 17.8 115.9 45 155.7 155.7 62.5 45 135 159 46

2.13 2.75 7.63 0.70 4.56 1.75 6.13 6.13 2.5 1.75 5.32 6.25 1.81

29.84 20.9 215

40 28 160

60.7 49.8 108.0

2.39 1.96 4.25

EXP 221 EXP 182 EXP 242

122.0 76 241.3

4.81 3.00 9.50

89.52

120

58.4

2.30

EXP 239

155.8

6.13

181 75 241 156 150 124 54 97 25.4 50.8 115 108 266.7 117.6 130.0 135 165.1 106 106 178 111 50.8 178 152.4 125 130

7.13 2.96 9.50 6.13 4.25 4.88 2.13 3.82 1.00 2.00 4.53 4.25 10.50 4.65 5.12 5.32 6.50 4.18 4.18 7.00 4.38 2.00 7.00 6.00 4.92 5.13

MARINE PARTS SUPPLY (800) 661-5353

171.4SUPPLY 230 108.0 4.25 661-5353 EXP 246 MARINE PARTS (800) 20.9 28 49.8 1.96 EXP 240 89.52 89.52 215 89.52 27.6 41 41 41 27.6 41 63.1 41 41 63.1 29.84 44 63.1 63.1 41 41 63.1 63.1 63.1 63.1

120 120 160 120 37 55 55 55 37 55 85 55 55 85 40 65 85 85 55 55 85 85 40 85

58.4 58.4 108.0 58.4 55.4 63.5 63.5 63.5 55.4 63.5 56.7 63.5 63.5 56.7 60.7 44.5 56.7 56.7 63.5 63.5 56.7 56.7 60.7 56.7

2.30 2.30 4.25 2.30 2.18 2.49 2.49 2.49 2.18 2.49 2.23 2.49 2.49 2.23 2.39 1.75 2.23 2.23 2.49 2.49 2.23 2.23 2.39 2.23

EXP 247 202-412 EXP 266 EXP 245 202-384 202-382 EXP 224 R1 202-387 EXP 234 EXP 230 EXP 259 EXP 243 EXP 261 EXP 227 EXP 130 EXP 170 EXP 200 202-392 202-467 202-474 EXP 232 EXP 177 EXP 207 202-443

MARINE PARTS SUPPLY (800) 661-5353

MARINE PARTS SUPPLY (800) 661-5353

R &MARINE D Marine PARTS Steel SUPPLYHalf (800) Couplings 661-5353 Pilot drilled only for finish parallel or taper boring by customer a c& d g

e

MARINE PARTS SUPPLY (800) 661-5353 b Part No 202-026

Type of Gearbox

Pilot drilled only Customer to finish bore

202-037

4" BW, PRM Hurth 5" B/W, PRM Hurth, Volvo 5" B/W, PRM Hurth, Volvo 6" PRM

202-054

6" PRM

202-120

6" Twin Disc

202-027 202-006

f a Flange Diameter 102.0 4.00 127.0 5.00 127.0 5.00 146.0 5.75 146.0 5.75 146.0 5.75

Pilot drilled to 16.5mm diameter Pilot drilled to 19.0mm diameter

b Hole Pitch Circle 82.55 3.25 109.95 4.25 109.95 4.25 120.6 4.75 120.6 4.75 120.6 4.75

c d No of Hole Size Holes 10.0 4 0.394 11.2 4 0.44 11.2 4 0.44 12.7 6 0.50 12.7 6 0.50 19.0 6 0.63

Pilot drilled to 19.0mm diameter MARINE PARTS SUPPLY (800) 661-5353 Pilot drilled to 21.0mm diameter Pilot drilled to 21.0mm diameter Pilot drilled to 21.0mm diameter

e Register Diameter 63.5 M 2.50 63.5 M 2.50 63.5 M 2.50 76.2 M 3.00 76.2 M 3.00 76.2 F 3.00

f Length

g Boss Diameter 54.9 57.2 2.16 2.25 54.9 85.9 2.16 3.38 124.5 85.9 4.90 3.38 89.4 92.7 3.52 3.65 149.0 92.7 5.87 3.65 152.4 92.7 6.00 3.65

R & D Marine Bobbins

R & D Marine can provide a Bobbin to extend the shaft. If the gearbox fitting you require is not listed, please a contact R & D Marine g

MARINE PARTS SUPPLY (800) 661-5353 c& d e

e

MARINE PARTS SUPPLY (800) 661-5353 f b Part No

202-169 202-251 202-250 Exp 225

Type of Gearbox

4" BW, PRM Hurth 5" BW, PRM Hurth,Volvo 6" PRM

a Flange Diameter 102.0 4.00 127.0 5.00 146.0 5.75 184.2 7.25

b Hole Pitch Circle 82.55 3.25 109.95 4.25 120.6 4.75 152.4 6.00

c No of Holes 4 4

Bobbin Dimensions d e Hole Register Size Diameter 10.0 63.5 M/F 0.394 2.50 11.2 63.5 M/F 0.44 2.50 12.7 76.2 M/F 0.50 3.00 19.0 95.25 M/F 0.75 3.75

MARINE PARTS SUPPLY (800) 661-5353 7 ⁄ " Twin Disc 1

4

6

6

f Length 87.4 3.44 124.5 4.90 148.9 5.86 152.4 6.00

g Neck Diameter 57.2 2.25 85.9 3.38 92.7 3.65 108.0 4.25

Units of measurement: Black Millimetres Red Inches

Meadow Works MARINE PARTS SUPPLY Contact Us By:(800) 661-5353 Clothall Road Baldock Hertfordshire England SG7 6PD

Tel: +44 (0)1462 892391 Fax: +44 (0)1462 896448 Web Site: www.randdmarine.com E mail: [email protected]

07/08