Data Loading...
T &M Shortform catalog V2.1.2 Flipbook PDF
T &M Shortform catalog V2.1.2
110 Views
78 Downloads
FLIP PDF 941.26KB
Test & Measurement Short form Catalog
Precision Making
tmi.yokogawa.com/in
WAVEFORM MEASUREMENT INSTRUMENTS
ScopeCorder DL950
Recently launched
The DL950 is a unique combination of a mixed signal oscilloscope and portable data acquisition recorder that can be used to capture both high speed transient events and long run trends. • • • • • • • • • • • •
Up to 32 analog or 128 digital channels Measure up to 50 days, or stream continuously to a PC 200 MS/s 14 Bit Isolation High Sampling Module 8 G points large memory 40 MHz Bandwidth SSD 512 GB Hard disk 10 GE data transfer Multi-unit synchronization of up to 160-CH Large 12.1-inch touch screen IEEE1588*/IRIG and GPS time synchronization Real time math, Power Analysis, User defined Computation Dual Capture, Action n trigger, CAN/CANFD, LIN and SENT protocol Analysis
Portable Scopecorder DL350 A portable version of the DL850E/DL850EV with many of the same data capture and analysis features in a device roughly 50% the weight of a DL850E. •
• • • •
Recently launched
Acquire sensor, analog and digital data with 19 unique input modules compatible with DL850E and DL350 including the ability to capture CAN/LIN/SENT serial data Built-in 16 bits of digital (discrete) input for comparing analog data to digital switches or pulses Up to 100 Mega points per module internal memory, up to 50 days continuous recording to SD card Intuitive operation using 8.4-inch TFT resistive touch screen usable with gloves and stable in environments with higher EMI Battery (included with /EB models) can operate the unit for approximately 3 hours and seamlessly takes over as backup power source if mains power is disconnected
IS8000 Integrated Software Platform The IS8000 software platform is an integrated solution that accelerates engineering workflow. It is a revolutionary software that tightly integrates the timing, control, and data collection from multiple instruments, creating a comprehensive measurement suite that delivers confidence, efficiency, and unity. • • • • •
Fast data acquisition up to 10MS/s Remote control DL950, DLM5000, WT5000 Optional software package for IEC Harmonic and Flicker compliance test IEEE1588 | WT5000 and DL950 data is time correlated with less than 10 μs error FFT and Math, Multi-unit time synchronization, High-Speed DAQ, Report Generation
WAVEFORM MEASUREMENT INSTRUMENTS
Mixed Signal Oscilloscope DLM5000 Series • • •
350 and 500 MHz Mixed-Signal Oscilloscope 8 analog input channels, plus 16 or 32bits digital input Up to 2.5 GS/sec sampling on all Channels, 500MPts of long memory and 1,00,000 history memory waveforms High resolution 12.1 inch large Touch screen display Serial bus analysis, power supply analysis, and advanced builtin math functions DLMsync supports multi-unit synchronization extending measurements up to 16 channels
• • •
Mixed Signal Oscilloscope DLM3000 Series • • • • •
200, 350 and 500 MHz mixed signal oscilloscope 2 or 4 input channels, plus 8-bit “Flex-MSO” input Up to 2.5 GS/sec sampling, 50 MPts memory and 20,000 history memory segments Comprehensive trigger functions combine analog, logic inputs, or serial bus triggers for complex waveforms Serial bus analysis, power supply analysis, and advanced built-in math functions
High Speed DAQ SL1000 • • •
Standalone High-Speed modular data acquisition system Unique modular inputs allow for sample rates up to 100 MS/s with input isolation 13 types of modules enabling measurements of Voltage temperature, etc.
Recently launched
High sensitivity Wide Bandwidth Current Probes • • • • •
•
30 A, 5 A and 0.5 A 3- range probes for testing standby to inrush Current Up to 120MHZ 1mA -5A, 2- Range probes up to 120MHZ 1-Range current probe bandwidth DC to 2/10/50/100 MHz Current probe measurement: 5/30/150/500A Probes can be powered P4/P8
Active Differential Probes For measuring floating and high-speed differential signals in combination with single-ended input oscilloscopes. • • • •
7000V /50MHZ 1.5kV /150MHZ 25V/500MHZ Probes can be powered with P4/P8 or probe power supply
POWER MEASUREMENT INSTRUMENTS
Precision Power Analyzer WT5000 The WT5000 is a versatile platform that delivers extraordinary precision and exceptional performance for the most demanding applications. Equipped with 7 user swappable and reconfigurable input elements plus 4 motor channels, the WT5000 is an ideal instrument for both electrical and mechanical power and efficiency measurements. • The world highest class accuracy Digital Power Analyzer with basic power accuracy of ±0.01%reading +0.02% range • 18bit ADC • 10MS/Sec Sampling Rate • Up to 500th Order of Harmonics • DC & 0.1 Hz to 10 MHz voltage measurement Bandwidth • Up to 7 power input measurement with modular structure
Precision Power Scope PX8000
Power Analyzer WT500
The world’s first precision power scope, bringing oscilloscope-style time-based measurement power measurement. Capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems. • 12-bit resolution, 20 MHz bandwidth • Analyze cycle-by-cycle trends • Measure Harmonics up to the 500th order
Compact and easy to use. The power analyzer for the renewable energy generation. • Simultaneous measurement of V, A, W, and harmonics • High speed 100ms update rate • Bandwidth DC, 0.5 Hz to 100 kHz • 15 V to 1000 V voltage range • 0.5 A to 40 A current range • Numeric, waveform, and trend displays
High Performance Power Analyzer WT1800E A high-precision, wide frequency range, Digital sampling power meter with superior cost performance in a compact, half-rack size. digital power analyzer with up to six input elements. Power Meter WT310E/330E
• • • • • •
Basic power accuracy: 0.1% of reading+0.05% range Bandwidth DC, 0.1 Hz to 100 kHz 5mA to 20A or 1A to 40A current ranges Auto ranging during integration measurement USB/Ethernet/GPIB/RS232 and MODBUS TCP Communication Interface
• • • • •
Basic power accuracy: 0.05% of reading +0.05%range Bandwidth DC, 0.1 Hz to 1 MHz Measures Harmonics up to 500th order Dual Harmonic Analysis 10mA to 5A or 1A to 50A current ranges
Precision Current Transformers Designed for use with Power Analyzers for precision current measurements for an overall high accuracy power measurement system. • Basic accuracy of 0.05% of reading • Frequency Range DC to 800 kHz • CT Ranges: 60 A to 2000 A Peak • Includes power supply/signal conditioning unit and connecting cables
OPTICAL TEST & MEASUREMENTS PRODUCTS
Series Optical Spectrum Analyzer AQ6370
•
Display: 8.4-inch color TFT LCD Multi-touch capacitive touchscreen
•
Power supply: AC adapter voltage 100 to 120 VAC or 200 to 240 VAC (auto switching) Battery (Li-ion) operation time 15 hours.
•
Three Models Converting a Wide Wavelength from 350 nm to 3400 nm
•
AQ6370D (600 to 1700 nm) Standard model optimized to the wavelengths often used in telecommunication applications
•
AQ6373B (350 to 1200 nm) Model for short-wavelength including visible light (VIS)
•
AQ6374 (350 to 1750 nm) Wide range model covering the spectrum from visible to communication wavelengths
Supports the same intuitive multi-touch functionality found in smartphones.
•
Used for the installation and maintenance of a wide range of network systems.
•
•
AQ6375B (1200 to 2400 nm) ,the OSA for Emerging applications
•
Series Optical Time Domain Reflectometer AQ1210
Optical Time Domain Reflectometer AQ7280
The AQ1210 OTDR delivers high reliability with its robust design for operating under harsh field conditions Footprint approx. size of a “Mini” tablet, weight of 1 Kg (2.2 Lbs.) • • • • •
AQ6376 (1500 to 3400 nm) Model for emerging applications in exNIR+MWIR regions AQ6377(1900-5500nm) Long wavelength model covering the MWIR region over 5 μm
•
OTDR AQ1000 Specifically designed to increase the productivity of field personnel working on the installation and deployment of optical access networks • Wavelengths: 1310/1550 nm & Dynamic ranges: 32/30 dB •
•
Multi-touch touchscreen , OTDR view modes: Trace view/Map view Measurements: Distance, Loss, Event search, Pass/Fail • Built-in Power checker and Light Source, and VLS
•
Multi-Application Test System AQ2200 The AQ2200 Multi Application Test System is the ideal system for measuring and evaluating a wide range of optical devices and optical transmitters.
10 hours battery operation USB power feeding Multi-touch touchscreen, 5.7-inch LCD, and a “field use” friendly rotary dial Measurement of PON systems with up to 128 splits High-speed real-time measurement Smart mapper function
Optical Wavelength Meter series AQ6150B The AQ6150B series can measure not only a single wavelength laser signal but also a multiple wavelength laser signal from a DWDM system and Fabry-Perot laser. •
Wavelength Range: 1270 to 1650 nm
Easy-to-View TFT color display
•
•
Wavelength accuracy: ±0.3 pm (AQ6151), ±1 pm (AQ6150)
Remote operation through Ethernet network • Built-in applications
•
•
Optical power stability measurement
Simultaneous measurement of up to 1024 wavelengths • Cope with modulated light and optical filter measurement
•
•
Short-term optical power fluctuation measurement
Measurement of all channels of 40 G and 100 G optical transceivers with WDM technology.
•
Flexible and space effective
•
Wide variety of plug-in modules Hot-swappable modules
GENERAL PURPOSE INSTRUMENTS
AC Power Calibrator LS3300 An AC power calibrator that can generate highly accurate, stable, and wide range output current and voltage. • •
• •
Ranges 10 mV - 2150 V and 0.3 mA to 62.5 A AC Basic power accuracy of 0.05% and phase angle resolution of +/- 0.03 degrees of 50/60 Hz Frequency range of 40 - 1200 Hz 1P3W, 3P3W and 3P4W with multiple units
AC Voltage Current Standard 2558A
DC Calibrators 2553A, 2560A
The instrument of choice for cost effective calibration of AC analog meters, current clamps and CT’s.
Ideal calibration source for DC measuring instruments and temperature measuring instruments and controllers.
• • •
Ranges 1 mV to 1200 V and 1 mA to 60 A AC Basic accuracy of 0.04% Frequency range 40 to 1000 Hz
Arbitrary Waveform Function Generator FG400 Easily generate basic, application specific and arbitrary waveforms.
14 models for precision pressure measurement.
•
•
•
•
Digital Manometer MT300
•
•
A high measurement accuracy of 0.01% as relative accuracy Long-term stability performance guaranteed with a measurement accuracy of 12 months
• • •
µHz to 30 MHz. 20 Vp-p. 1 or 2 Channels Output channels are isolated from ground Synchronize up to 6 units for up to 12 output channels Provides a variety of sweeps, modulations and waveform functions
2553A ranges 10 mV to 30 V and 1 mA to 100 mA DC. Basic voltage accuracy +/- 75 ppm 2560A ranges 100 mV to 1000 V and 100 µA to 30 A DC. Basic voltage accuracy +/- 50 ppm Both offer 10 different types of thermocouples and Pt100 RTD
Digital Multimeter 6.5 Digits DM7560 •
High speed data logging (Maximum 30 kS/s) High-capacity internal memory with up to 100 k points Trend / histogram analysis available both real-time and offline
• •
Multi Channel Source Measure Unit GS820 Programmable DC Source GS200 • • • • •
High precision low noise output Voltage source to 32 V Current source to 200 mA Source and Measure GPIB and USB Interface
Source Measure Unit GS610 •
Highly accurate and highly functional programmable voltage/current source.
•
Maximum output voltage and current are 110 V and 3.2 A
•
USB storage
•
V/I Curve trace
•
Isolated 2-channel source and measurement function • 18 V model: 7 V and 3.2 A or 18 V and 1.2 A 50 V model: 20 V and 1.2 A or 50 V and 0.6 A • 1pA resolution at extremely small current range 200 Na • Channel expansion through master-slave synchronization link Generate arbitrary waveforms consisting of up to 100000 points at
PORTABLE TEST INSTRUMENTS
Pressure Calibrator CA700 • Basic accuracy: Pressure (measurement) 0.01% rdg • Pressure range: Vacuum - 0.83 bar to 700 bar • Current (source/measurement) 0.015% rdg Voltage (source/measurement) 0.015% rdg • As Found”, “As Left” data and error rate (%) can be recorded. • DC mA signals can be measured by supplying power to the transmitter from a 24V DC power supply
Handy Calibrator CA500 / 550 • •
•
A high measurement accuracy of 0.01% as relative accuracy Long-term stability performance guaranteed with a measurement accuracy of 12 months CA550 Calibration features with HART communication (READ/WRITE) capability required for field calibration activities.
Power Quality Analyzer CW500 •
Achieves various power measurements with simple operations - One press on direct keys switches to any of five measurement displays. Easy wiring and setting with the start navigation function and automatic detection of clamp-on probes Data can be compiled into graphs and reports with one click
•
•
•
Digital Insulation Tester MY600 Digital Multimeters Series TY700 • • • • •
Maximum Measurement Accuracy: 0.020% rdg + 2 dgt Wide operating temperature range: -20 °C to 55°C 4.5 digit, 7 Segment display Shockproof elastomer casing Safe Design: Shutters prevent erroneous insertion of test leads into current measurement terminals (terminal shutters)
Clamp on Testers CL250/255/420 • • • • • •
ACA/DCA ϕ 55 AC/400 to 2000 A, DC/400 to 2000 A AC V/DC V/Ω DC Output • Hz, RMS for CL255 Accuracy: (23°C ±5°C, Less than 75% RH), ±(% rdg + dgt)
• • • • • •
Two colors for judging measurement results. AC Voltage: 2 Vrms to 600 Vrms (45 to 65 Hz) DC Voltage: +/- 2 to 600 Vdc Approximately 0.5 s high-speed measurement Low-Resistance: 40.00 to 4,000 Ω USB communication and memory function Auto lighting backlight and LED light Insulation deterioration diagnosis (PI and DAR measurement*)
Yokogawa Test & Measurement has been developing measurement solutions for over 100 years, consistently finding new ways to give R&D teams the tools needed to gain the best insights from their measurement strategies. Yokogawa instruments are renowned for maintaining high levels of precision and for continuing to deliver value for far longer than the typical shelf-life of such equipment. Yokogawa believes that precise and effective measurement lies at the heart of successful innovation – and has focused its own R&D on providing the tools that researchers and engineers need to address challenges great and small. Yokogawa takes pride in its reputation for quality, both in the products it delivers – often adding new features in response to specific client requests – and the level of service and advice provided to clients, helping to devise measurement strategies for even the most challenging environments.
• M/s.YOKOGAWA INDIA LIMITED
Address: Plot No.96 Electronic City Complex, Hosur Road, Bangalore -560 100 • Phone: +91 (80) 4158 6666 • Web: tmi.yokogawa.com/in
For Test & Measurement Contacts Email ID: [email protected] Web: tmi.yokogawa.com/in Contact No: + 91 80 4158 6666 / 6396 / 6334