Data Loading...

Viccarbe_Aleta Metal Chair and armrest_UNEBIFMA_EN Flipbook PDF

Viccarbe_Aleta Metal Chair and armrest_UNEBIFMA_EN


111 Views
100 Downloads
FLIP PDF 84.61KB

DOWNLOAD FLIP

REPORT DMCA

TEST CERTIFICATE Nº 231.Z.1805.243.EN.01 References: 1805003-02, 1803187-03, 1705141-01- Ci

PRODUCT: COMPANY:

TEST:

RESULT:

ALETA METAL BASE CHAIR ALETA METAL BASE ARMCHAIR VICCARBE HABITAT, S.L. PG. Norte, C/Travesía 1 al camí Racó S/N 46469 BENIPARRELL (VALENCIA) SPAIN Phone: 34 9612010 - Fax: 34961211211 www.viccarbe.com Compliance with the following standards: ANSI/BIFMA X5.4-2012 Lounge and Public Seating. Test. UNE-EN 16139:2013vc2015 Furniture. Strength, durability and safety. Requirements for non-domestic seating. Satisfactorily complies with the specifications set by the ANSI/BIFMA X5.4-2012, for single types A and C seats and UNE-EN 16139:2013vc2015 for non-domestic use seats, level 1 general use, according to the following tests,

TESTS 4.Types of Lounge Seating (simple seat) 5. Backrest horizontal static load test (Fh1 = 667 N, Fh2 = 1 112 N, t = 1 min.) 7. Backrest durability Test. Horizontal (Fh = 334 N, Fv = 102 Kg, n = 120 000 cycles) 9. Arm Strength test. Horizontal static load (Fh1 = 445N, Fh2 = 667N, t=1 min) 10. Arm Strength test. Vertical static load (Fv1 = 750N, Fv2 = 1125N, t=1 min.) ANSI/BIFMA 13. Arm durability test. (F = 400N, n = 60 000 cycles) X5.4-2012 14.Seating durability test (M = 57 kg, h = 30 mm., n = 100 000 cycles) 15. Impact test (h = 152 mm., M1 = 102 kg, M2 = 136 kg,) 16.3 Leg sideways static load test (Fh1 = 334 N, Fh2 = 503 N, t =1 min.) 16.4 Leg forward static load test (Fh1 = 334 N, Fh2 = 503 N, t =1 min.) 21.3 & 21.5 Front and rear stability test

RESULT Type A and Type C CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT STABLE

4. Safety. General requirements 4.3. Determination of stability (front , side, rear ) 4.5. Safety of the construction: 1. Seat and back static load test (Fv = 1 600N, Fh = 560N, 10 times) 2. Seat front edge static load test (Fv = 1 300N, 10 times) 3. Vertical static load on back (Fv = 600N, Q = 1 300N, 10 times) 5. Arm sideways static load test (Fh = 400N, 10 times) 6. Arm downwards static load test (Fv = 750N, 10 times) UNE-EN 8. Seat and back durability test (Fv =1 000N, Fh = 334N, n = 120 000 cycles) 16139:2013 9. Seat front edge durability test (Fv = 800N, n = 50 000 cycles) vc2015 10. Arm durability test (F = 400N, n= 60 000 cycles) 12. Leg forward static load test (Q = 1 000 N, Fh = 500 N, 10 times) 13. Leg sideways static load test (Q = 1 000 N, Fh = 400 N, 10 times) 14. Seat impact test (h = 240 mm., 10 times) 16. Arm impact test (α = 38°, h = 210 mm., 10 times) Annex A2. Backward fall test (5 times) Annex C. Dimensional requirements for office visitors chair

CORRECT STABLE CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT

Paterna, June 22, 2018

Signed. José Emilio Nuévalos Head of Furniture and Products Laboratory This certificate only refers to the samples tested by the AIDIMME laboratory. The particular results of the tests are described in technical reports: nº 231.I.1805.243.ES.01 dated 05/11/2018, Nº 230.I. 1706.414.ES.01 of 06/26/2017 and nº 231.I.1805.244.ES.01 of 05/10/2018. AIDIMME is a member of INNOVAWOOD, The European Network of Research and Training for the Forest, Wood and Furniture Industry, among whose members are: BRE-CTTC (United Kingdom), COSMOB (Italy), DTI (Denmark), FCBA (France), ITD (Poland), SHR (Holland), SP Trätek (Sweden), TRADA-FIRA (United Kingdom), University of Zagreb (Croatia), WKI (Germany).