Data Loading...
Xerox 5790 (Regal) Digital Color Copier/Printer Flipbook PDF
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226 Revised November 1995 Xerox 5790 (Regal) Digital Color Copier/Printer C
127 Views
47 Downloads
FLIP PDF 28.74KB
Xerox 5790 (Regal) Digital Color Copier/Printer COPY VOLUME RANGE
SPEED
- This product was designed to provide “benchmark” image quality. To maximize Customer Satisfaction this product should be operated up to 30,000 copies / prints per month 80 - 90% of which are color copies. Usage above this range may result in a higher service frequency (see chart below).
PERFORMANCE AT MATURITY A C v a g l l S s e / r M v o i n c t e h
- 9 copies per minute (cpm) (4 color) for 8.5x11 Long Edge Feed (LEF) - 36 cpm (B/W) for 8.5x11LEF - 18 cpm (B/W) for 8.5x14, 11x17 Short Edge Feed (SEF) - 4.5 cpm (4 color) for 8.5x11, 8.5x14, 11x17 SEF - 4.5 cpm (B/W) Transparencies - 1.8 cpm (4 color) Transparencies
INPUT 4
2
0 0
7
14
21
28
AMCV/AMPV
- Copies between service calls on a digital color copier is dependent on customer expectation levels of quality, volume, applications and thruput materials. Trained operators can minimize service calls
- Document Glass Mode - up to 11x17 - Automatic Document Feeder (ADF) is an option - 50 sheet maximum - 16 - 28 # paper weight - 5.5 x 8.5 to 11x17 originals - Film Projector Mode - 35mm negative or positive slide in film holder. - 35mm negative or positive on platen - 4 x 5 and 60 x 60 positive films (60 x 90 mm w/SA adjustment)
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Color Copier/Printer THRUPUT Tray
Size*
Capacity**
1
8x10 to 11x17 8x10 to 11x17 8x10 to 11x17 8x10 to 11x17
250
Specified Weights 16-24#
250
16-24#
250
16-24#
50
16# bond up to 90# index 60# coated
2 3 Bypass
* Cassette size is set by the Xerox technical representative at install and is adjustable by the Xerox technical representative only . ** 20# paper - Recommended paper to maximize copy quality is Xerox Image series LX 24# (smooth bright white paper). This paper is specifically designed to maximize image quality and machine performance over a wide range of environmental conditions. - Recommended 90# index or equivalent can be run satisfactorily. However, it is not to be expected to match the performance of Xerox Image Series LX 24# - Attempts to feed greater than 90# index or recommended equivalent may cause machine damage.
- Xerox coated stock 32 # bond (3R5093) and 60# bond (3R5095), which were designed for the xerographic process, can be run satisfactorily. Coated papers are not to be expected to match the performance of Image Series LX paper. - Sorter option: - 20 bin sorted or stacked sets of the above thruput sizes and weights at 50 sheets per bin. - Sorter top tray will handle all above thruput sizes up to 99 sheets. - Output tray will handle all above thruput sizes up to 250 sheets. Note: For more detailed information on thruput materials, please refer to the Xerox Materials Usage Guide for Regal. (700P99701)
COPY QUALITY - Color Quality is subjective and could be impacted by lighting. - Like any color reproduction process there will be some variances in color quality over time. - Copy Quality is strongly influenced by paper. - Key Applications should be copied on the 5790 and reviewed with the customer. - Transparencies are non absorbent and may exhibit non uniform density streaks in large solid areas from the fuser agent film.
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Color Copier/Printer CUSTOMER SUPPORT - The Xerox Customer Support Center Helpline, 1-800821-2797, is provided for all service calls and available for Customer application questions. - The Supplies Marketing Center is available at 1-800822-2200 for order of paper and thruput materials. - Fee-based training courses or hourly sessions are available through Xerox Document Management Training Representatives.
DUPLEX COPYING - Regal 5790 is recommended for duplex applications. - As with any full color copier, duplex performance is not expected to match the performance for single sided copying. Paper jam rates will be higher than the rate you will experience for the same thruput material in single sided mode. Extensive duplex operation may have a secondary effect on performance and copy quality of single sided jobs. - When running duplex copies, the second side should be run only from the Paper Tray bypass.
CONFIGURATION LIMITATIONS - 5790 does not allow for Sorters and Film Projectors to be placed on the same unit.
INSERTION OF COPIES INTO HIGH VOLUME COPIERS - Insertion of Regal 5790 copies in 5090/5390/ DocuTech 135 requires CBU validation. - Do not use 5790 inserts in 5100 due to incompatibility with the fuser.
TRANSPARENCIES - Transparencies for this product are restricted to 3R5765, 3R5775 and 3R3108 and can only be supported out of the bypass tray if fed in the correct manner. The 3R5765 premium transparency is specifically designed to provide optimum copy quality including more vivid colors. - Use of other transparencies may cause machine damage. Continued use of transparencies other than those recommended may result in customer being placed on time and materials. Please see the MUG 700P99701 for additional information.
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Copier / Printer SUPPLIES Reorder #
Units / Carton
Net Wt./CTN
Dry Ink - Black - Cyan - Yellow - Magenta
6R718 6R719 6R720 6R721
2 Cartridges 2 Cartridges 2 Cartridges 2 Cartridges
600 g. 600 g. 600 g. 600 g.
Developer - Black - Cyan - Yellow - Magenta
5R319 5R320 5R321 5R322
1 Pouch 1 Pouch 1 Pouch 1 Pouch
650 g. 650 g. 650 g. 650 g.
Fuser Agent Waste Toner Bottle
8R3993 8R7664
1 Bottle 2 Bottles
Liter -
Note: Dry Ink and Developer consumption will vary depending on actual area coverage.
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Copier / Printer ENVIRONMENTAL AND ELECTRICAL REQUIREMENTS Temperature Humidity
Min 50 ºF (10 ºC) 15%
Max 90 ºF (32 ºC) 85%
Power Consumption Power (VA) Warm-up 1440 Standby average 288 Run mode (4 Color) Peak 1200 Average 1020 Specifications: Ground Fault Interrupter Single phase - 2 Wire plus ground Service - 15 AMP or 20 AMP (Sole use not required, but recommended) Line to neutral - 115 Volts (+6/-10%) Frequency - 60 HZ (± 2%)
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Copier / Printer Space Requirements Configurations for 5790
Moveable
Width (Inches)
Non Edit /w Catch Tray or Edit /w Catch Tray or ADF /w Catch Tray on a floor
Yes
72”
Non Edit /w Catch Tray or Edit /w Catch Tray or ADF /w Catch Tray on a mobility-plate
Yes
72”
No-Edit /w Catch Tray or Edit /w Catch Tray or ADF /w Catch Tray at a stationary install
No
72”
Non Edit /w Sorter or Edit /w Sorter or ADF /w Sorter at a stationary install
No
88”
ADF /w Catch Tray & Edit Pad Option on a floor
Yes
103”
ADF /w Catch Tray & Edit Pad Option on a mobility-plate
Yes
103”
ADF /w Catch Tray & Edit Pad Option at a stationary install
No
103”
ADF /w Sorter & Edit Pad Option at a stationary install
No
119”
Depth (Inches) 71” Room or 86” Hallway 71” Room or 90” Hallway 91” Room or 106” Hallway 91” Room or 106” Hallway 91” Room or 106” Hallway 91” Room or 106” Hallway 91” Room or 106” Hallway 91” Room or 106” Hallway
NOTE: Minimum floor to ceiling height requirement for all installations is 78” (2000 mm)
XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995
Xerox 5790 (Regal) Digital Color Copier/Printer Primary Customer Regal 5790 applications
Special Considerations or performance limitation identified by Xerox and agreed to by the customer.
I have reviewed and understand these product specifications. Customer
Xerox Sales Representative
Xerox Customer Service Engineer
Xerox Color Network Marketing Executive XEROX CUSTOMER SUPPORT CENTER - DOCUMENT #100226
Revised November 1995