Story Transcript
Full water-based fair-faced concrete protection coating system
CERAMI CRETE SYSTEM
The system is comprised of newly developed water-based, penetrating, water absorption preventive primer, CERAMI CRETE PRIMER and super durable water-based acrylic silicone resin clear, or super durable, dirt resistant, water-based fluorine resin clear. CERAMI CRETE PRIMER provides water absorption preventive layer and excellent sealing effect. With excellent prevention of water absorption, permeability and weather resistance, the system prevents efflorescence, carbonation, and protects fair-faced concrete under severe conditions over a long period of time.
Features
System Composition
Super durability, super weather resistance
Colour variation
Dirt resistance
Alkali resistance
Moisture permeability
Acid resistance
Environmentally friendly & safe
Anti-carbonation
Undercoat Topcoat
Suitable Substrates Fair-faced concrete (can not be applied on moulding boards, GRC panels and PC panels) * Suitable application area is unpainted or the substrate on which penetrating, water absorption preventive material is applied. When a film forming clear finish is applied on the substrate, please make inquiries to the nearest sales office.
* For CERAMI CRETE F system, mid-coat process will be added.
Standard Application Specification System
The below products and application specification may be changed without notice.
Undercoat
Mid-coat
Topcoat
Type of gloss
CERAMI CRETE Si
CERAMI CRETE PRIMER
-
CERAMI CRETE Si
Gloss / 30% gloss
CERAMI CRETE F
CERAMI CRETE PRIMER
CERAMI CRETE F MID-COAT
CERAMI CRETE F
Gloss / 30% gloss
Common process Process
Material
Surface treatment 1
(23ºC)
Undercoat
Dilution ratio (wt. %)
Consumption (kg/m²)
No. of coat
Interval (hrs) Between processes
In process
Remarks
Final curing
Dry the surface completely to bring water content to a maximum of 10% and pH to 10 or less. Completely remove any powder, efflorescence, panel releasing(removing) agent, dirt and dust, and make good of unevenness, irregularities, and scratches.
CERAMI CRETE PRIMER
100
0.10-0.13
Water
0-10
-
*1
1
-
-
3 or more
Roller (short nap), Brush, Airless spray gun Discharge: 400-600 ml/min. Pattern width: 25-30 cm
Clear finish
(23ºC)
CERAMI CRETE Si (acrylic silicone resin based) 2
Topcoat
*3 CERAMI CRETE Si
Water
100
0.13-0.15
5-20
-
*2
1
Roller (short nap), Brush,
-
-
spray gun 24 or more Airless Discharge: 400-600 ml/min. Pattern width: 25-30 cm
(23ºC)
CERAMI CRETE F (fluorine resin based) 2
Mid-coat
CERAMI CRETE F MID-COAT
100
0.10-0.13
Water
0-15
-
*3 CERAMI CRETE F BASE
3
Topcoat
100
CERAMI CRETE F HARDENER
1.33
Water
0-15
*2
1
-
3 or more
-
-
-
*2
0.10-0.13
1
Roller (short nap), Brush, Airless spray gun Discharge: 400-600 ml/min. Pattern width: 25-30 cm Roller (short nap), Brush,
spray gun 24 or more Airless Discharge: 400-600 ml/min. Pattern width: 25-30 cm
-
Colour clear finish CERAMI CRETE Si (acrylic silicone resin based) *3 CERAMI CRETE Si COLOUR CLEAR 2 Topcoat Water
(23ºC)
100
0.13-0.15
5-20
-
*4
*2
1
-
-
Roller (short nap), Brush, Airless spray gun 24 or more Discharge: 400-600 ml/min. Pattern width: 25-30 cm
(23ºC)
CERAMI CRETE F (fluorine resin based) 2
Mid-coat
CERAMI CRETE F MID-COAT
100
0.10-0.13
Water
0-15
-
*3 CERAMI CRETE F COLOUR
CLEAR BASE
3
Topcoat
100
CERAMI CRETE F HARDENER
1.33
Water
0-15
*2
1
-
3 or more
-
-
-
Roller (short nap), Brush, Airless spray gun Discharge: 400-600 ml/min. Pattern width: 25-30 cm
*2
0.10-0.13
Roller (short nap), Brush,
1
Pattern width: 25-30 cm
-
*1 For CERAMI CRETE PRIMER, adjust the number of coats depending on the absorption of substrate. Especially, in case of high absorption, make sure to apply the second coat. Please contact the nearest sales office for more details. In case of following conditions after the first coat, the second coat is required. (The consumption is 0.20-0.26 kg/m² in total and the interval in process shall be 3-24 hours. )
spray gun 24 or more Airless Discharge: 400-600 ml/min.
1) There is no gloss on the painted surface. 2) Wet look is appeared when putting water 3 hours after the application. *2 Two coats are required depending on the absorption of substrate. Please contact the nearest sales office for more details. *3 It is available in gloss and 30% gloss finish. *4 Apply the second coat to make the colour darker. The consumption is 0.26-0.30 kg/m² in total and the interval in process shall be more than 3 hours.
Packing Style CERAMI CRETE PRIMER
15 kg/can
CERAMI CRETE Si (Gloss, 30% gloss)
15 kg/can 15 kg/can
CERAMI CRETE F MID-COAT
CERAMI CRETE F (Gloss, 30% gloss) 15.2 kg/set CERAMI CRETE Si COLOUR CLEAR (Gloss, 30% gloss) 15 kg, 4 kg/can CERAMI CRETE F COLOUR CLEAR (Gloss, 30% gloss)
15.2 kg/set
Hazards Information and Safety Precautions Handle a product in accordance with SDS (Safety Data Sheet). Be careful about the safety control when conducting application work.
201711 1HQ1