Data Loading...
DATA SHEET ARUBA 100 SERIES ACCESS POINTS Flipbook PDF
DATA SHEET ARUBA 100 SERIES ACCESS POINTS MOUNTING • Included with AP:- Molded mounting tabs for attaching to 15/16” T-b
136 Views
114 Downloads
FLIP PDF 194.43KB
DATA SHEET
ARUBA 100 SERIES ACCESS POINTS For high-density Wi-Fi client environments
Multifunctional and affordable 100 series wireless access points (APs) deliver enterprise-grade WiFi to high-density client environments in offices, hospitals, schools, retail stores and warehouses. These high-performance 802.11n APs deliver wireless data rates up to 300 Mbps per radio and ensure peak performance by utilizing channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases RF signal range and reliability.
CHOOSE YOUR OPERATING MODE
The 105 series of APs features two dual-band 2.4-GHz and
The 100 series of APs offers a choice of operating modes to
5-GHz radios with 2x2 MIMO and four integrated omni-
meet your unique management and deployment requirements.
directional downtilt antennas, making it ideal for warehouses and high-ceiling deployments. The 104 series features the same radios with external antenna connectors.
WI-FI CLIENT OPTIMIZATION To eliminate sticky client behavior, every Aruba AP comes
• Controller-managed mode. When managed by Aruba Mobility Controllers, 100 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
with ClientMatch™ technology, which continuously gathers
• Aruba Instant™ mode. In Aruba Instant mode, a single
session performance metrics and utilizes this data to steer
AP automatically distributes the network configuration
mobile devices to the best AP and radio on the WLAN, even
to other Instant APs in the WLAN. Simply power-up one
while users roam.
Instant AP, configure it over the air, and plug in the other
BEST-IN-CLASS RF MANAGEMENT All Aruba APs include Adaptive Radio Management™ technology, which is essential to creating the most reliable, high-performance WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to optimize Wi-Fi client performance and ensures that APs stay clear of RF interference. The 100 series can be configured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
APs – the entire process takes about five minutes. For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up. If WLAN and network requirements change, a built-in migration path allows 100 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller.
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
ADVANCED FEATURES • Spectrum Analysis: --Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference. • Security:
• Supported modulation types: --802.11b: BPSK, QPSK, CCK --802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM • Transmit power: Configurable in increments of 0.5 dBm • Maximum transmit power:
--With an OpenDNS service subscription, Aruba Instant
--2.4 GHz: 23 dBm (limited by local regulatory requirements)
delivers integrated web filtering, malware and botnet
--5 GHz: 23 dBm (limited by local regulatory requirements)
protection to every device connected to the WLAN --Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys --SecureJack-capable for secure tunneling of wired Ethernet traffic
OPERATING MODES • 802.11a/b/g/n Aruba Instant AP • 802.11a/b/g/n Mobility Controller-managed AP • Air monitor (AM) • Secure enterprise mesh • Remote AP (RAP) when used with a Mobility Controller
WIRELESS RADIO SPECIFICATIONS • AP type: Dual-radio, dual-band 802.11n indoor • Software-configurable dual radio supports 2.4 GHz and 5 GHz • 2x2 MIMO 802.11n with two spatial streams and up to 300 Mbps per radio • Supported frequency bands (country-specific restrictions apply): --2.400 to 2.4835 GHz --5.150 to 5.250 GHz
• Maximum ratio combining (MRC) for improved receiver performance • Cyclic delay diversity for improved downlink RF performance • Space-Time Block Coding (STBC) for increased range and improved reception • Association rates (Mbps): --802.11b: 1, 2, 5.5, 11 --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 --802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps) • 802.11n high-throughput (HT) support: HT 20/40 • 802.11n packet aggregation: A-MPDU, A-MSDU
POWER • 48 volts DC 802.3af power over Ethernet (PoE) • 12 volts DC for external AC supplied power (adapter sold separately) • Maximum power consumption: 12.5 watts
ANTENNA • RF interconnect attenuation (between radio and connectors or antennas): 0.5 dB • AP-104 and IAP-104: Four RP-SMA connectors for external single-band antennas
--5.250 to 5.350 GHz
• AP-105 and IAP-105: Four integrated downtilt omni-
--5.470 to 5.725 GHz
directional antennas for 2x2 MIMO with maximum
--5.725 to 5.875 GHz
antenna gain of 3.0 dBi in 2.4 GHz and 4.5 dBi in 5 GHz
• Available channels: Dependent upon configured regulatory domain • Controller-managed, dependent upon configured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum • Supported radio technologies: --802.11b: Direct-sequence spread-spectrum (DSSS) --802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) --802.11n: 2x2 MIMO with two spatial streams
INTERFACES • Network: One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX • Power: One DC power connector • Other: One RJ-45 console interface
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
MOUNTING • Included with AP: --Molded mounting tabs for attaching to 15/16” T-bar drop-tile ceiling --Slotted tabs for screw mounting to a wall, ceiling or other flat surface • Optional mounting kits: --AP-105-MNT: Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle. --AP-105-MNT-DC: Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle. Both cradles are modified to allow access to AP DC power interface. --AP-105-MNT-C: Aruba 100 series AP mount kit contains two ceiling-grid rail adapters for 9/16” and 15/16” flat rails.
MECHANICAL • Dimensions/weight (unit): --132 mm x 135 mm x 45 mm (5.2” x 5.3” x 1.8“) --0.3 kg (.66 lb) • Dimensions/weight (shipping): --195 mm x 170 mm x 55 mm (7.7” x 6.7” x 2.2“) --0.44 kg (.97 lb)
ENVIRONMENTAL • Operating: --Temperature: 0° C to 50° C (+32° F to +122° F) --Humidity: 5% to 95% non-condensing • Storage and transportation temperature range: --Temperature: -40° C to +70° C (-40° F to +158° F)
REGULATORY • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative.
CERTIFICATIONS • CB Scheme Safety, cTUVus • UL2043 plenum rating • Wi-Fi certified 802.11a/b/g/n
WARRANTY • Limited lifetime warranty
MINIMUM ARUBAOS VERSION • AP-104: ArubaOS 6.1.3.0 on an Aruba Mobility Controller • AP-105: ArubaOS 3.4.1.0 on an Aruba Mobility Controller • Aruba Instant 2.0.0.3 software
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
RF PERFORMANCE TABLE Maximum transmit power per active transmit chain (dBm)
Receive sensitivity (dBm)
Maximum transmit power per active transmit chain (dBm)
2.4 GHz
Receive sensitivity (dBm)
5 GHz
802.11b 1 Mbps
20
-96
–
–
2 Mbps
20
-96
–
–
5.5 Mbps
20
-94
–
–
11 Mbps
20
-93
–
–
6 Mbps
20
-96
20
-96
9 Mbps
20
-96
20
-96
12 Mbps
20
-96
20
-96
18 Mbps
20
-95
20
-95
24 Mbps
20
-92
20
-91
36 Mbps
19
-89
19
-88
48 Mbps
18
-85
18
-84
54 Mbps
17
-83
17
-83
MCS0
20
-96
20
-96
MCS1
20
-95
20
-94
MCS2
20
-93
20
-92
MCS3
20
-90
20
-89
MCS4
19
-87
19
-86
MCS5
18
-82
18
-82
MCS6
17
-81
17
-80
MCS7
15
-80
15
-79
MCS8
20
-96
20
-95
MCS9
20
-93
20
-92
MCS10
20
-91
20
-90
MCS11
20
-87
20
-87
MCS12
19
-84
19
-84
MCS13
18
-81
18
-80
MCS14
17
-80
17
-78
MCS15
15
-77
15
-77
802.11a/g
802.11n HT20
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
RF PERFORMANCE TABLE Maximum transmit power per active transmit chain (dBm)
Receive sensitivity (dBm)
Maximum transmit power per active transmit chain (dBm)
2.4 GHz
Receive sensitivity (dBm)
5 GHz
802.11n HT40 MCS0
20
-93
20
-92
MCS1
20
-93
20
-92
MCS2
20
-90
20
-89
MCS3
20
-86
20
-86
MCS4
19
-83
19
-83
MCS5
18
-79
18
-80
MCS6
17
-77
17
-77
MCS7
15
-76
15
-76
MCS8
20
-92
20
-92
MCS9
20
-89
20
-90
MCS10
20
-87
20
-87
MCS11
20
-84
20
-84
MCS12
19
-82
19
-81
MCS13
18
-76
18
-77
MCS14
17
-76
17
-75
MCS15
15
-73
15
-73
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
IAP-105 AND AP-105 ANTENNA PATTERN PLOTS Horizontal (Azimuth) plane
332
338
343
349 354
326
0
6
5
11
17
23
332
28 34
0
321 315
-5
281
79
270
X
-30
264 259
276
90
270
96
264
107
248
174 169
180
163
158
84
X
90
259
101
107
253 248
113
242
118
236
124
231
129
191 186
73
96
129 225
135
197
68
79
135
141
219
141 203
62
-15
146 208
56
Y
-20
124
214
45
-30
118
236
219
39
-25
113
242
225
28
281
84
101
253
231
23
51
287
73
-20
276
17
34
-10
293
68
-25
11
-5
298
62
-15
287
6
0
304
56
Y
298
0 5
309
51
293
349 354
315
45
-10
343
321
39
309 304
338
326
214
152
146 208
203
197
2.45 GHz
191 186
174 169
180
163
158
152
5.5 GHz
Vertical (Elevation) plane
-29
-23
-17
-34
-11
-6
0
6
5
11
17
23
-29
29
-40 -51 -10
-63
Z
-80
74
Y
-86 -30
-91
-103 -109
-80
86
-86
-120
120
-126
126
-131
131 137
-154
-160
-166 -171 -177
166 177 171
2.45 GHz
160
154
46 57
Z
63 69
-20
74 80
-25
Y
-30
-91
86 91
-97
97
103
103
114
143
34
-103
109
-114
149
29
97
-97
-149
23
-15
-74
80
91
-137 -143
17
51 -10
-69
69
-25
11
40
-63
63
-20
-74
6
-5
-57
57
-15
-69
0 5
-51
51
-57
-6
0
-46
46
-5
-11
-40
40
-46
-17
-34
34
0
-23
-109
109
-114
114
-120
120
-126
126
-131
131
-137 -143
137 143 -149
-154
-160
-166 -171 -177
166 177 171
5.5 GHz
160
154
149
DATA SHEET ARUBA 100 SERIES ACCESS POINTS
ORDERING INFORMATION Part Number
Description
IAP-105
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Unrestricted regulatory domain. These products should be considered rest-of-world products and must not be deployed in the United States, Japan or Israel.
IAP-105-US
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – US
IAP-105-IL
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – IL
IAP-105-JP
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – JP
AP-105
Aruba 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas
AP-105-1
Aruba 105 wireless AP, TAA compliant
AP-105-F1
Aruba 105 wireless AP, FIPS/TAA
AP-105-MNT
Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle.
AP-105-MNT-C
Aruba 100 series AP mount kit contains two ceiling-grid rail adapters for 9/16” and 15/16” flat rails.
AP-105-MNT-C2
Aruba 100 Series Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails).
AP-105-MNT-DC
Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle. Both cradles are modified to allow access to AP DC power interface.
IAP-104
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Unrestricted regulatory domain. These products should be considered rest-of-world products and must not be deployed in the United States, Japan or Israel.
IAP-104-US
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory domain: United States
IAP-104-IL
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory domain: Israel
IAP-104-JP
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory domain: Japan
AP-104
Aruba 104 wireless AP, 802.11a/b/g/n 2x2:2, dual radio, antenna connectors.
AP-104-F1
Aruba 104 wireless AP, FIPS/TAA
AP-AC-UN
12V/18W indoor Access Point AC power adapter. Universal, ships with 8 country-specific plug inserts (US, EU, UK, Australia, China, Korea, Argentina, Brazil), covering all Aruba core countries
AP-AC-12V18
12V/18W indoor Access Point AC power adapter. Does not include country-specific power cord (order separately)
PD-3501G-AC
15.4W 802.3af PoE midspan injector, 10/100/1000Base-T Ethernet
1344 CROSSMAN AVE | SUNNYVALE, CA 94089 1.866.55.ARUBA | T: 1.408.227.4500 | FAX: 1.408.227.4550 | [email protected]
www.arubanetworks.com ©2015 Aruba Networks, Inc. Aruba Networks®, Aruba The Mobile Edge Company® (stylized), Aruba Mobilty Management System®, People Move. Networks Must Follow.®, Mobile Edge Architecture®, RFProtect®, Green Island®, ETIPS®, ClientMatch®, Bluescanner™ and The All Wireless Workspace Is Open For Business™ are all Marks of Aruba Networks, Inc. in the United States and certain other countries. The preceding list may not necessarily be complete and the absence of any mark from this list does not mean that it is not an Aruba Networks, Inc. mark. All rights reserved. Aruba Networks, Inc. reserves the right to change, modify, transfer, or otherwise revise this publication and the product specifications without notice. While Aruba Networks, Inc. uses commercially reasonable efforts to ensure the accuracy of the specifications contained in this document, Aruba Networks, Inc. will assume no responsibility for any errors or omissions. DS_AP100Series_020215