Data Loading...
PRODUCT INFORMATION MODEL: PT-330 - Phase Perfect Flipbook PDF
www.phaseperfect.com Ph. 605-343-7934 PRODUCT INFORMATION MODEL: PT-330 Phase Perfect® Digital Phase Converters represen
118 Views
24 Downloads
FLIP PDF 259.07KB
PRODUCT INFORMATION MODEL: PT-330 Phase Perfect® Digital Phase Converters represent the ultimate technology for converting single-phase electrical power to threephase electrical power. In fact, the three-phase power produced by Phase Perfect® is often superior in power quality to utility supplied three-phase. Phase Perfect® utilizes the latest advances in solid state power switching technology. Unlike rotary phase converters, it does not rely on a motor to generate a voltage. Proprietary software controls power switching devices that generate three-phase power with much more precision and efficiency. Its patented design makes it unlike any other phase converter. POWER QUALITY Phase Perfect® produces true sinusoidal three-phase output voltages balanced to within 1% under all load conditions. Because the output voltage is a sine wave with very low harmonic distortion, all types of three-phase equipment can be safely powered. Input current is true sinusoidal, near unity (.99) power factor and does not produce harmonics which can pollute the power grid. VERSATILITY Phase Perfect® can safely power virtually any three-phase application within its rated capacity. It can power resistive and capacitive loads as well as motor or inductive loads. Its power quality makes it ideal for powering demanding loads such as CNC machine equipment, submersible pumps and other voltage sensitive applications. EASY INSTALLATION AND OPERATION Phase Perfect® is available with built-in contactor and adjustable solid state overload relay, which allows it to function as a motor starter for most single-motor applications. It also has a control circuit and terminals, which allows an external switch to control both the converter and the load. Installation is straightforward and simple and can usually be accomplished in minutes with a minimum of additional equipment required. ECONOMY Utility three-phase service can cost thousands of dollars to install, even when three-phase lines are nearby. Phase Perfect® is an affordable alternative that provides better phase balance than most utilities will specify for their service. It also protects three-phase equipment from damage due to under-voltage, over-voltage and single-phasing that can occur with AC mains power. Phase Perfect® is rugged, reliable and typically 97% efficient.
www.phaseperfect.com
Ph. 605-343-7934
Model PT330 FEATURES ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾ ¾
Balanced three-phase voltages High efficiency Electronic power factor correction High momentary overload current capacity Automatic brownout and over-voltage protection Fault protection and overload protection Built-in motor starter capability Clean power fed back to utility grid from three-phase generating loads 50 or 60 Hz input frequency allows operation anywhere in the world
SPECIFICATIONS Specifications are subject to change without notice. SINGLE-PHASE POWER 1-phase current characteristics Sinusoidal, 2% total harmonic distortion Power factor Near unity, all load conditions (.99) Voltage 187 – 260 volts Recommended maximum 160-70 amps phase circuit breaker rating THREE-PHASE POWER Rated HP Rated Current Output 3-phase power characteristics Phase-to-phase voltage balance Voltage Maximum 3-phase current, steady state Overload current, 4 seconds PROTECTIVE FUNCTIONS Under-voltage Over-voltage Internal temperature sensor GENERAL Efficiency Operating temperature range Storage temperature Weight Enclosure Dimensions (H x W x D) Type 1 indoor Type 3R rainproof
10 30 Sinusoidal, 3% total harmonic distortion Better than 1% (NEMA MG1 standard for voltage unbalance) Equal to single-phase input voltage – 187-260 volts 36 amps 150 amps
Automatic shutdown 199 V Automatic shutdown >260 V, restart when