Data Loading...
QuickleenS msds Flipbook PDF
Materials Safety Data Sheet for Quickleen-S describes the formula as non-hazardous. Quickleen-S is recommended for use o
119 Views
34 Downloads
FLIP PDF 30.87KB
Spechem Consultants Pty Ltd. ABN: 27 134 107 083
5/21 Carlo Drive Cannonvale Qld. 4802. PH0437198732/FAX: 07 49481961
Material Safety Data Sheet Issue Date: 21st October 2013 Issue No 3.
PRODUCT NAME: QUICKLEEN-S Not classified as hazardous according to criteria of Worksafe Australia.
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY Product Name Product Use Company Name Address Emergency Tel. Telephone Number/fax
QUICKLEEN-S Abrasive cleaner for use on stainless steel, brass and copper OPM Quickleen International Pty Ltd Level 1 / 1 Queens Rd Melbourne. VIC 3000. Australia +61 3 9863 7766 Tel: +61 3 9863 7766 Fax: +61 3 9863 8010
2. COMPOSITION/INFORMATION ON INGREDIENTS Information on Composition Ingredients
Product based on silica and cleaning additives. Name Surfactant blend Corrosion inhibitors Sulphamic Acid Perfume Silica
CAS N/A N/A 5329-14-6 (Proprietary) 14808-60-7
Proportion 1-5% 1-5% 1-5% 0-1% Balance
3. HAZARDS IDENTIFICATION Not classified as hazardous according to the criteria of Worksafe, and not classified as a dangerous good according to the ADG code. Risk phrases: R36/38 Irritating to skin and eyes Safety phrases: S2 Keep out of reach of children. S24/S25 Avoid contact with skin and eyes. Hazard Category Nil Symptoms & Effects May dry skin on prolonged contact. Other Hazard Information: Any dust generated may be irritating to eyes
4. FIRST AID MEASURES Inhalation Ingestion Eye Skin First Aid Facilities Advice to Doctor
Remove victim to fresh air. Investigate possible misuse of material. Seek medical attention. Rinse mouth thoroughly with water immediately. Give water to drink. DO NOT induce Vomiting. Seek medical attention. Remove contact lenses. Immediately irrigate with copious amounts of water for at least 15 minutes. Eyelids to be held open. Seek medical assistance. Wash affected areas with copious quantities of water. If irritation occurs, seek medical advice. Normal washroom facilities. Treat symptomatically.
Material Safety Data Sheet Page 2 of 4 Product Name:
QUICKLEEN-S Not classified as hazardous according to criteria of Worksafe Australia
5. FIRE FIGHTING MEASURES Extinguishing Media Specific Hazards Precautions in connection with Fire
Use extinguishing media suitable for surrounding fire situation. Nil. Firefighters should wear Self-Contained Breathing Apparatus and full protective clothing to minimise exposure. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. If safe to do so, remove undamaged containers from fire area.
6. ACCIDENTAL RELEASE MEASURES Spills & Disposal
Sweep up, but avoid generating dust. Vacuum area. Collect and seal in properly labelled drums for disposal. Neutralise remaining product with lime or soda ash, adjusting pH to 6-10. Wash area down with excess water.
7. HANDLING AND STORAGE Handling
Storage
Repeated or prolonged exposure without personal protection should be avoided in order to lessen the possibility of disorders. It is essential that all who come into contact with this material maintain high standards of personal hygiene ie. washing hands prior to eating, drinking or going to the toilet. Use only in a well ventilated area. Keep container closed and bung in place. This product should be stored in a cool, dry, well ventilated area, out of the reach of children and away from oxidising agents. Do not store for prolonged periods in direct sunlight. Keep containers closed when not in use and securely sealed and protected against physical damage. Inspect regularly for deficiencies such as damage or leaks.
8. EXPOSURE CONTROLS, PERSONAL PROTECTION Exposure Limits
No value assigned for this specific material by the National Occupational Health and Safety Commission (NOHSC). However as with all chemicals, exposure should be kept to the least possible levels. Respiratory Protection Product is a damp powder with low dusting potential, and the method of use further reduces dusting potential, however care should be exercised to avoid breathing of dust. Where ventilation is inadequate and/or dust is generated, the use of an approved respirator with dust filter or a supplied air respirator complying with AS/NZS 1715 and AS/NZS 1716 is recommended, depending on surrounding work conditions. Final choice of appropriate breathing protection is dependant upon actual airborne concentrations and the type of breathing protection required will vary according to individual circumstances. Expert advice may be required to make this decision. Reference should be made to Australian Standards AS/NZS 1715 – Selection, Use and Maintenance of Respiratory Protective Devices; and AS/NZS 1716 – Respiratory Protective Devices. Eye Protection Safety glasses. Hand Protection Plastic or rubber gloves. Body Protection Not necessary. Eng. Controls Avoid generating and inhaling dusts. The use of respiratory protection, or an exhaust ventilation system and equipment, as necessary, is recommended. Other information No Biological Limit Value allocated.
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odour Boiling Point Solubility in Water Specific Gravity (H2O = 1) Physical State
Off white powder. Fresh floral None applicable Not soluble in water None allocated Powder
Material Safety Data Sheet Page 3 of 4 Product Name:
QUICKLEEN-S Not classified as hazardous according to criteria of Worksafe Australia
9. PHYSICAL AND CHEMICAL PROPERTIES Cont…. Flash Point Flammability Flammable Limits LEL Flammable Limits UEL
Non flammable Non flammable Non flammable Non flammable
10. STABILITY AND REACTIVITY Stability Hazardous Polymerization Materials to Avoid Hazardous Decomposition Products Hazardous Reaction
Stable under normal conditions of storage and handling. Will not occur. None known. None known.
Not a fire hazard.
11. TOXICOLOGICAL INFORMATION Toxicology Information Inhalation
Ingestion
Skin
Eye Chronic Effects
Not available May cause irritation to the mouth, nose and throat. Inhalation of dust may result in respiratory irritation. Chronic respiratory problems may occur with long term inhalation of fine dusts, which may continue after exposure has ceased. While unlikely with the use of damp or wet Quickleen-S, it is still recommended that care should be exercised to avoid generating dusts from any dried product. Ingestion can cause nausea and vomiting. Not a likely source of exposure, however, may be harmful if swallowed in large amounts. Potential symptoms include nausea, diarrhoea, abdominal pain and vomiting. May cause irritation with prolonged contact with the skin, which can result in redness, itchiness, swelling and possibly lead to dermatitis. Repeated or prolonged contact with this material may result in systematic absorption leading to possible harmful or toxic effects similar to those of ingestion and inhalation. A severe eye irritant. May cause eye soreness due to abrasive nature of material. Prolonged and repeated exposure through skin contact, inhalation or swallowing of this material with no personal protection may result in toxic effects.
12. ECOLOGICAL INFORMATION Environ. Protection Mobility Persistence / Degradability Bioaccumulation Ecotoxicity
Harmful to aquatic life due to surfactant properties. Not harmful to birdlife. Prevent this material from entering the environment. No data is available for this product. No data is available for this product. No data is available for this product. No data is available for this product.
13. DISPOSAL CONSIDERATIONS Dispose of waste according to federal, E.P.A., state and local regulations. Assure conformity with all applicable regulations.
Material Safety Data Sheet Page 4 of 4 Product Name:
QUICKLEEN-S Not classified as hazardous according to criteria of Worksafe Australia
14. TRANSPORT INFORMATION U.N. Number Proper Shipping Name DG Class Hazchem Code Packing Group EPG Number IERG Number
None allocated None allocated None allocated None allocated None allocated None allocated None allocated
15. REGULATORY INFORMATION Safety Phrase Poisons Schedule AICS (Australia)
S24/25 Avoid contact with skin and eyes Not Scheduled All ingredients are listed in the Australian Inventory of Chemical Substances (AICS).
16. OTHER INFORMATION This MSDS summarises our best knowledge of the health and safety hazard information of the product and how to safely handle and use the product in the workplace. Each user must review this MSDS in the context of how the product will be handled in the workplace and in conjunction with other materials. If clarification or further information is needed to ensure that an appropriate risk assessment can be made, the user should contact this company. Contact Person/Point SDS History
Spechem Consultants: Technical Manager 0437198732 MSDS issue No3 Dated 21st October 2013 (Replaces version dated 16th August 2011.)
… End of MSDS…