Viccarbe_Aleta Wooden Base_UNE_EN Flipbook PDF

Viccarbe_Aleta Wooden Base_UNE_EN
Author:  V

8 downloads 235 Views 194KB Size

Recommend Stories


Porque. PDF Created with deskpdf PDF Writer - Trial ::
Porque tu hogar empieza desde adentro. www.avilainteriores.com PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com Avila Interi

EMPRESAS HEADHUNTERS CHILE PDF
Get Instant Access to eBook Empresas Headhunters Chile PDF at Our Huge Library EMPRESAS HEADHUNTERS CHILE PDF ==> Download: EMPRESAS HEADHUNTERS CHIL

Story Transcript

TEST CERTIFICATE Nº 231.Z.1903.133.EN.01 Reference: 1905067-01, 1906097-01-Ci

PRODUCT:

ALETA CHAIR WOODEN BASE

COMPANY:

VICCARBE HABITAT, S.L. PG. Norte, C/Travesía 1 al camí Racó S/N 46469 BENIPARRELL (VALENCIA) SPAIN Phone: 34 9612010 - Fax: 34961211211 www.viccarbe.com

TEST:

Compliance with the following standard: UNE-EN 16139:2013 vc2015 Furniture. Strength, durability and safety. Requirements for non domestic seating.

RESULT:

Satisfactorily complies with the specifications set by the UNE-EN 16139:2013 vc2015, level 1, according to the following tests, TESTS

RESULT

4. Safety. General requirements 4.3. Determination of stability (front, corner, side and rear EN 1022:2018) 4.5. Safety of the construction: Test 1. Seat and back static load test (Fv=1600 N, Fh =560 N, 10 times) Test 2. Seat front edge static load test (Fv= 1300 N, 10 times) Test 3. Vertical static load on back (Fv = 1300 N, Q = 600 N, 10 times) Test 8. Seat and back durability test (Fv =1 000 N, Fh =300 N, n= 100 000 cycles) Test 9. Seat front edge durability test (Fv = 800 N, n= 50 000 cycles) Test 12. Leg forward static load test (Q = 1 000 N, Fh = 500 N, 10 times) Test 13. Leg sideways static load test (Q = 1 000 N, Fh = 400 N, 10 times) Test 14. Seat impact test (h= 240 mm., 10 times) Test 15. Back impact test (α= 38°, h= 210 mm., 10 times) Annex C Dimensional requirements for office visitor chairs

CORRECT STABLE CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT CORRECT

Valencia, July 12, 2019

Signed. José Emilio Nuévalos Head of Furniture Laboratory This certificate only refers to the samples tested by the AIDIMME laboratory. The particular results of the tests are described in technical report Nº231.I.1907.418.ES.01 dated on 07/3/2019 AIDIMME is a member of INNOVAWOOD, The European Network of Research and Training for the Forest, Wood and Furniture Industry, among whose members are: BRE-CTTC (United Kingdom), COSMOB (Italy), DTI (Denmark), FCBA (France), ITD (Poland), SHR (Holland), SP Trätek (Sweden), TRADA-FIRA (United Kingdom), University of Zagreb (Croatia), WKI (Germany).

Get in touch

Social

© Copyright 2013 - 2024 MYDOKUMENT.COM - All rights reserved.